for DV 235T
1. Fist DOWNLOAD FIRMWARE
LINK1
2. rename the downloaded file (remove the.zip file extension)
3. dont unzip or extract the file
4. OPEN BROWSER GO TO 192.168.15.1
LOGIN DETAILS
username:smart
password:smart
5. GO TO MANAGEMENT>UPGRADE CLICK BROWSE>BROWSE downloaded file
6. Click Apply
7. AFTER REBOOT LOGIN to Gui USING
Username: smart
Password: smart
8. then go to management>recovery
click factory default
9. AFTER REBOOT LOGIN 10.1.1.254 TO ACCESS GUI using
Username: admin
Password: admin
10. Change Mac Address
Open DOS Command (CMD)
telnet 10.1.1.254
login: admin
password: admin
type:enable
type:router
type:wan mac
type: commit
type: exit
type: reboot
11. After Reboot GO TO GUI 10.1.1.254 then Login (Username: admin Password: admin)
12. go to wimax>scanner then click edit then insert to add frequency then click apply
list of frequency for SMART(Domain SMARTBRO.NET )
2337500
2347500
2357500
2345000
2355000
2365000
list of frequency for GLOBE
2505000
2507500
2510000
2602000
2612000
2622000
2638000
13. After Adding frequency Click Apply
14. FOR GLOBE
USERNAME = GENERATEDPASSWORD@GLOBELINES.COM.PH (OR if VIP MAC use the other domain)
PASSWORD= GENERATEDPASSWORD(by wimaxtools, yyyxyyyz or other tools)
IDENTITY = MAC@GLOBELINES.COM.PH ( if VIP MAC use the other domain) remove COLON of MAC
15. On Option ONLY (Auto Prepend Auth Mode and Ignore Cert Verification) are the check
16. In username textbox only 32 char is the maximum allowed so here the tweak to add the domain
RIGHT CLICK TEXTBOX of USERNAME THE INSPECT ELEMENT then look MAXLENGHT=32 AND CHANGE IT TO 50 OR 100
THEN ADD .ph in USERNAME TO SEE IF OK.
then CLICK APPLY
Thats it.. Reboot Then You are Connected
17. For Smart. Change the Domain used and Frequency Used.
CREDITS to DISCOVERER of this tricks.
0 comments:
Post a Comment